Page Comparison

Verify booking

• This is an option for incoming online bookings in any of the following situations:
  • The incoming booking is linked to a new or existing QuickAdd
  • The incoming booking was matched to an existing patient, and the booker has not yet verified via email that they made the booking
• Verifying the booking just means verifying that it was a genuine attempt by the booker to book an appointment. It leaves open the possibility that the event details will not be exactly as requested.
• Verifying the booking leaves the event in tentative status, to be confirmed closer to the date of the appointment.
• If the booking is for a QuickAdd, or for a patient who has not yet email-verified the booking, and the requested appointment type is associate with online forms, then your clicking Verify booking may* send the booker an online forms request.
  • For more information, see: Online forms, Associating online forms with event types, and Creating an online forms request in connection with an appointment.
  • *The forms request won't send if both of the following are true:
    • All of the Only required once forms associated with the event type have already been submitted by the patient.
    • All of the other forms associated with the event type are currently part of Incomplete forms requests for the patient.
• If the booking is for a telehealth-type appointment for a QuickAdd, or a patient who has not yet email-verified the booking, then your clicking Verify booking will send the booker a telehealth appointment invitation email containing instructions for joining the videoconference.
  • For more information about telehealth appointment invitations, see: Setting up telehealth appointment invitations.
  • At Setup > Scheduling > Event types, users with the Maintain event types user privilege can edit event types to designate them as telehealth event types.
  • See also: Telehealth videoconferences on this page.

Reject booking

• This is an option whenever Verify booking is an option.
• If the event is for a new QuickAdd, clicking Reject booking will delete the event and the QuickAdd.
• If the event is for an existing QuickAdd or patient, clicking Reject booking will delete the event.

Unlink from patient

• This is an option whenever Verify booking is an option.
• Use Unlink from patient > Link to new QuickAdd if Blueprint OMS wrongly matched the booking to an existing patient or QuickAdd file. (It's very unlikely that this would happen.)
• Use Unlink from patient > Link to different patient if Blueprint OMS wrongly created a new QuickAdd for the booking yet the patient already exists in your system (or in the unlikely case that Blueprint OMS matched the booking to the wrong patient file in your system).
  • If the booker submits the form with a typo or a nickname, that might prevent Blueprint OMS from recognizing that the patient exists in the system already.
  • Matching is done on the following criteria:
    • First name
    • Last name
    • Phone number or email address

Mark "Arrived"

• This is an option for events on the current day, which are in the Confirmed, Left message, No answer, or Tentative status.
• Clicking this option will place the patient in the Patients in clinic list for the event's clinic location. The time count will start.
• If the provider has Blueprint OMS open and has the Show patient arrived notification setting enabled, then the provider will receive a notification that the patient has arrived.

Mark "Arrived & Ready"

• This is an option for events on the current day, which are in the Confirmed, Left message, No answer, or Tentative status.
• Clicking this option will place the patient in the Patients in clinic list for the event's clinic location. The time count will start.
• If the provider has Blueprint OMS open and has the Show patient arrived notification setting or the Show patient ready notification enabled, then the provider will receive a notification that the patient has arrived.

Mark "Ready"

• This is an option for events on the current day, which are in the Arrived status.
• Clicking this option will turn the patient's name green in the Patients in clinic list for the event's clinic location. The time count will continue.
• If the provider has Blueprint OMS open and has the Show patient ready notification setting enabled, then the provider will receive a notification that the patient has arrived.

Mark "In progress"

• This is an option for events on the current day, which are in the Ready, or Arrived & Ready status.
• Clicking this option will turn the patient's name blue in the Patients in clinic list for the event's clinic location. The time count will restart at zero to measure the event's duration.
• If the provider has Blueprint OMS open and has the Show patient arrived notification, then the provider will receive a notification that the patient has arrived.

Mark "Completed"

• This is an option for events on the current day, which are in the In progress status.
• Clicking on this option will remove the patient form the Patients in clinic list. The time count for the event duration will stop.

Delete

• This is an option for all events except those for which an automated appointment reminder has been sent.
• Deleted events will show in the <Inactive> status view of the schedule.
  • Deleted events whose would-be times are in the future can be restored from the patient journal.
    Image RemovedImage Added

Edit details

• This is an option for all events. Clicking it will open the Edit event details dialog, allowing you to edit the event details.
  Image RemovedImage Added
  

Reschedule

• This is an option only for events satisfying either for the following sets of criteria:
  • The event is in the past and its status is not Completed, Arrived, or In progress.
  • The event is in the future and its status is Cancelled.
• Clicking the option will open the Edit event details dialog, allowing you the reschedule the event for a future date, and to change the event's status.

Event history

This is an option for all events. Clicking it will open the Event history dialog, which will show the date, user, and description of the adjustments made to the selected event, and the state changes of any online forms associated with the event.
Image RemovedImage Added

Change status

This is an option for all events. It is a sub-menu of event statuses. Select one of the options to set that as the new status for the event.
Image RemovedImage Added

Create linked journal entry

• This is an option for events that are linked to patients or QuickAdds. Clicking this option will open the Patient journal entry dialog, allowing you to a new journal entry which will be linked to the event.
  Image RemovedImage Added
• If the appointment type has Journal entry required set, then creating a linked journal entry will fulfill that requirement.
  • If the appointment is in Completed status, this fulfillment will be indicated visually by lock icon turning from red  to black  (if the appointment is linked to a patient) or to grey  (if the appointment is linked to a QuickAdd).

Link journal entries

• This is an option for events that are linked to patients or QuickAdds. Clicking this option will open the Journal entries dialog, set to the Unlinked tab. The Unlinked tab will show all the patient's journal entries that are not currently linked to appointments and that are enabled for linking to events.
  Image RemovedImage Added
  
  • At Setup > Journal entry types, users with the Maintain journal entry types user privilege can edit the Can link to event setting for any of the journal entry types.
• If the appointment type has Journal entry required set, then linking a journal entry will fulfill that requirement.
  • If the appointment is in Completed status, this fulfillment will be indicated visually by lock icon turning from red  to black  (if the appointment is linked to a patient) or to grey  (if the appointment is linked to a QuickAdd).

View linked journal entries

This is an option for events that are linked to patients or QuickAdds. Clicking this option will open the Journal entries dialog, set to the Linked tab. If any journal entries are linked to the event, you will be able to read them.
Image RemovedImage Added

Initiate videoconference

• This is an option for future events that are linked to patients/QuickAdds, and are not marked as telehealth events.
  Image RemovedImage Added

• If you click this option, you will be prompted to send an invitation for an impromptu videoconference to the contact. Then, the chosen telehealth platform will launch.

  Note
  If your clinic does not have a customized template in place for impromptu telehealth videoconference invitations, then the instructions will be used with those default invitation templates. The default instructions for each platform can be customized at Setup > Scheduling > Telehealth.

  
  

• 
  

  Tip
  You can also initiate telehealth videoconferences this way by using the Patient drop-down menu.

  
  

Join videoconference

• This is an option for events that are linked to patients/QuickAdds, and are marked as telehealth events.
  Image RemovedImage Added
• If you click this option, the chosen telehealth platform will launch.

Send videoconference instructions

• This is an option for events that are linked to patients/QuickAdds, and are marked as telehealth events.
  Image RemovedImage Added
• The patient will most likely have received videoconference instructions already. This option allows you to send the instructions again. It is recommended that you do this a few minutes before the videoconference is scheduled to take place.
• If you click on this option, you will be prompted with the Send videoconference instructions dialog, which will offer the choice of sending the instructions via email or SMS. The contact's information will be filled into the Send to field by default, but you will have a chance to edit that field. Blueprint OMS will prefer to send the instructions via email.
  Image RemovedImage RemovedImage AddedImage Added
  
  • If the patient has communication preferences that do not allow contact by one or the other of these methods, then it will not be possible to send the instructions that way. For example, if the contact has Do not email set, the dialog will look like this.
    Image RemovedImage Added

Send online forms

• This option will be greyed out for users without the Send email user privilege.
• This is an option for all events. Clicking this option allows you to send an online forms request to the contact's email address or to a clinic tablet.
• When the online forms feature is being used as intended, the forms request is sent when the event is created (if a Blueprint OMS user created the event), when the event is verified by a Blueprint OMS user (if the event is an incoming online booking for a QuickAdd), or when the event is verified by the patient (if the event is an incoming online booking that was automatically matched to an existing patient file). This sending is done before the user has the opportunity to right-click on the event and see the Send online forms option in the menu. Therefore, the Send online forms menu option is meant primarily for last-minute or day-of forms requests; examples of its appropriate use would be for the COVID-19 pre-visit survey (which, because if its last-minute nature, is best not to associate with any event types), and forms requests for patients who cannot receive emails, either because of their communication preferences or their missing data.
  • For more information, see: Associating online forms with event types.

View online forms

This is an option for events that are connected to existing online forms requests. It is a sub-menu for the forms that have been sent in connection with the event. Clicking on any of the options in this menu will open in a new tab the selected form in its current state.

Link to patient

• This is an option for events that are not linked to any patient or QuickAdd file. Clicking this option allows you to link the event to a patient or QuickAdd.
• If the event is part of a repeating series, then once it is linked to a patient or QuickAdd, it will no longer be counted as part of that series; if you later edit one of the unlinked events of the series, and then choose to apply the edit to all events in that series, then the event from that which had been linked to a patient or Quickadd will remain unaffected by the edit.
• The ability to link an event to a patient after the event's creation is meant to enable block scheduling, which is an alternative availability scheduling.
  • For more information, see: Block scheduling and Scheduling availability. 

Patient details

This is an option for events that are linked to patient files. Clicking this option opens the patient's file in a new tab.

QuickAdd details

This is an option for events that are linked to QuickAdd files. Clicking this option opens the QuickAdd's file in a new tab.